Woodworking Blog for Beginners & Experts | Tools & Tips for Woodworking Projects

blog-header-brandon1

Improving the Human Power Feeder

There are many important factors on getting a nice, clean cut at the router table or shaper. Cutter design, flute direction, spindle horsepower, size and depth of cut, workpiece control (featherboards and hold downs), grain direction, and machine calibration just to name a few. I was reminded of another factor the other day when I was milling parts for cabinet doors on the shaper. I noticed the edge along the panel groove of my stile was getting some tear out. …

Posted in Router Bits, Shaper Cutters | Tagged , | Leave a comment
blog header matt k

Wide Range of High Quality Tooling

It’s time to build some new high quality cabinets for the shop.

Posted in Router Bits, Shaper Cutters | Tagged , , | Leave a comment
blog-opendesk-header

Opendesk’s Tools of the Trade

Furniture platform Opendesk runs through seven essential router bits that are used to manufacture their furniture around the world.

Posted in General Tips for Woodworkers, Router Bits | Tagged | Leave a comment

Router Table vs Shaper

One of the big frustrations with folks who initially get into woodworking is, “what machines do I start with?” Slider vs traditional table saw? Combo machines vs. standalone? Router table vs shaper? With such large purchases, the stakes of getting the correct machine that fits their needs are high. The debate between shaper vs. router table is a common one (and one that will rage on long after this is written). But it certainly helps to make a better decision …

Posted in General Tips for Woodworkers, Shaper Cutters | Leave a comment
Finishing Kitchen Cabinets

Framing an Add-On Room, Finishing Kitchen Cabinets

Framing Carpentry For well over a couple of weeks (and usually only for half a day as I do not last long in the Texas heat) I have been doing an add-on room.  I love framing carpentry, as it really does go from the ground up.  It also does not take long to show a great deal of progress. The homeowner expressed his amazement at how fast the walls were up (I surprised myself too!).  One reason was because the …

Posted in Router Bits | Leave a comment
woodworking wood gate

Preparation and Planning

This past couple of weeks I worked on a porch gates and fence renovation for a friend.  He has goats that can get on his porch which wraps around the entire house.  The porch does have posts and rails but the stiles between the posts are far enough apart that the goats still go through the space between.  There are also openings that did not have any gates. The solutions: put up some more stiles and build some gates.  My …

Posted in General Tips for Woodworkers | Tagged , , , , | Leave a comment

A Most Ancient of Modern Crafts

I read about a team from China finding what may be Noah’s Ark, which is another way of saying, “box”.  Probably it was a large rectangular box, very much like a two by four with a hollow center!  That is a very large two by four. Initial carbon dating puts the wood found at the site around 4800 years ago.  For a point of discussion, let’s accept that this discovery is a fact. This means woodworking has been around for …

Posted in General Tips for Woodworkers | Tagged , , | Leave a comment
wood-beams-toolstoday

New Tool, New Projects

New tools and projects go hand in hand. A new project unleashes a dream into the world. It is what a honeymoon is to the wedding ceremony, what putting up a tent is to a camping trip; it is cutting wood after drawing a plan.This month saw the start of a new stairway for the loft in our house. After reviewing many space saving stairway plans on the internet (a.k.a. Pinterest) I decided on purchasing a stair kit (Arke Karina). The stairs are in place and I am adding handrails now.

Posted in Router Bits, Saw Blades | Leave a comment
table top

Tools of the Trade

The right tool for the job never fails. It just needs the right hands.The right tool for the job never fails. It just needs the right hands.The right tool in the hand of a skilled, practiced woodworker turns a beautiful act of nature into a wondrous work of art and function. So let me be the first to say I appreciate the skilled and industrious people who make the best tools for those of us who are learning the craft of wood.

Posted in Router Bits, Saw Blades | Leave a comment

Hitting the Nail on the Head!

It’s a little embarrassing, but back when I was a young pup at the carpentry, I was once told to nail the back panel of a kitchen cupboard in place. The nail was 3mm long and the wood was 10mm thick, yet I still managed to nail the 3mm nail clean through the wood. I not only put a hole right in the middle of the back panel, but I destroyed the smooth paintwork! We had to fix, strip and …

Posted in General Tips for Woodworkers | Tagged , , , | Leave a comment